English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

Microwave-induced rock fracture is one of the promising approaches of achieving non-blasting continuous mining and assisted mechanical rock breaking. It is of great theoretical and practical significance to study the temperature effect and fracture characteristics of rocks of different sizes under microwave heating; however, there are few studies in this field. Microwave heating of φ 50 × 100 mm, φ 50 × 50 mm, and φ 50 × 25 mm sandstone samples with different heating powers and times was performed to measure the temperature of the sample, the microwave energy absorbed, the mass, and the P-wave velocity before and after heating. The results show suppress that (i) under the same heating conditions, the mass difference and the temperature increase range of φ 50 × 100 mm and φ 50 × 50 mm samples are larger than that of the φ 50 × 25 mm samples; (ii) the wave velocity change rate and the damage factor of samples increase with the increase of heating power and time; (iii) different size specimens have different crack- propagation modes. The main crack of φ 50 × 100 mm specimens usually starts from the middle of the height of the specimen; for the φ 50 × 50 mm specimens, it usually starts from the middle or bottom-end surface of the specimen height; the main crack of φ 50 × 25 mm specimens starts from the vertical surface of the specimen. With an increase in the heating time, the length and width of the main crack continuously increase and secondary cracks are generated. The fracture mode of the sample is also related to the size of the sample. The fracture mode can be divided into three parts: melt fracture, thermal-expansion fracture, and secondary thermal-expansion fracture. The relationship between the sample temperature and the absorbed microwave energy is approximately linear.

Analysis of Microwave Thermal Stress Fracture Characteristics and Size Effect of Sandstone under Microwave Heating