English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

A thin silicon oxide (SiOx) layer (thickness: 1.5–2.0 nm) formed at an Al2O3/Si interface can enhance the interface properties. However, it is challenging to control the characteristics of thin SiOx layers because SiOx forms naturally during Al2O3 deposition on Si substrates. In this study, a ~1.5 nm-thick SiOx layer was inserted between Al2O3 and Si substrates by wet chemical oxidation to improve the passivation properties. The acidic solutions used for wet chemical oxidation were HCl:H2O2:H2O, H2SO4:H2O2:H2O, and HNO3. The thicknesses of SiOx layers formed in the acidic solutions were ~1.48, ~1.32, and ~1.50 nm for SiOx-HCl, SiOx-H2SO4, and SiOx-HNO3, respectively. The leakage current characteristics of SiOx-HNO3 were better than those of the oxide layers formed in the other acidic solutions. After depositing a ~10 nm-thick Al2O3 on an SiOx-acidic/Si structure, we measured the effective carrier lifetime using quasi steady-state photoconductance and examined the interfacial properties of Al2O3/SiOx-acidic/Si using surface carrier lifetime simulation and capacitance–voltage measurement. The effective carrier lifetime of Al2O3/SiOx-HNO3/Si was relatively high (~400 μs), resulting from the low surface defect density (2.35–2.88 × 1010 cm−2eV−1). The oxide layer inserted between Al2O3 and Si substrates by wet chemical oxidation helped improve the Al2O3/Si interface properties.

energies

Wet Chemical Oxidation to Improve Interfacial Properties of Al2O3/Si and Interface Analysis of Al2O3/SiOx/Si Structure Using Surface Carrier Lifetime Simulation and Capacitance–Voltage Measurement