English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

Air-gap (AG) technology on back-end-of-line (BEOL) provides a means to improve performance without area or power degradation. However, the “blind” use of AG based on traditional design methodologies does not provide sufficient performance gain. We developed an AG-aware design methodology to maximize performance gain with minimum cost. The experimental results of the proposed methodology, which was tested using a 10 nm Advanced RISC Machine (ARM) Cortex-A9 quad-core central processing unit (CPU), indicated a performance gain of 6.1–8.4% compared with traditional AG design. The performance gain achieved represents about half of the 10–15% performance improvement under the same power by a process node shrink. A Si process of consecutive double AG layers was developed by overcoming various process challenges, such as AG depth control, Cu/ultra-low-k damage, the hermetic AG liner, and step-height control above the AG. Furthermore, the capacitance was reduced by 17.0%, which satisfied the target goal in the simulation stage for the assumed structure. The optimized integration process was validated according to the function yield of the CPU, which was comparable to that of a non-AG process. The time-dependent dielectric breakdown and electromigration lifetime of the AG wire satisfied the 10-year criteria, and the assembly yield was verified.

Timing Criticality-Aware Design Optimization using BEOL Air Gap Technology on Consecutive Metal Layers