English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

A single radiator that is a part of four-port diversity Multiple-Input Multiple-Output (MIMO) antenna design is composed of four octagonal rings embedded between the two opposite sides of a T-shaped conductive layer surrounded by inverted angular edge cut L-shaped and E-shaped structures. The radiators are placed at the four corners with common ground at the center of a smartphone to form a four-element mobile MIMO antenna. The printing of the antenna is carried out on the flexible polyamide substrate (dielectric constant = 3.5 and loss tangent = 0.0027) with dimensions of 70 × 145 × 0.2 mm3. A wide impedance bandwidth of (84.12%) 2.39 to 5.86 GHz is achieved for all four radiators. The compact size of the radiators along with their placement enables the proposed MIMO antenna to occupy much less area while preserving the space for 2G/3G/4G antennas. The placement of the antennas results in self-isolation between antenna elements by achieving isolation greater than 17.5 dB in the desired operating bands. Furthermore, besides showing a high efficiency of 85% and adequate gain above 4 dBi, good diversity performances such as Envelope Correlation Coefficient (ECC) of less than 0.05, Diversity Gain (DG) of above 9.8 dB, Mean Effective Gain (MEG) of −3.1 dB, Channel Capacity of 21.50 bps/Hz, and Total Active Reflection Coefficient (TARC) of below −10 dB are achieved by the flexible MIMO smartphone antenna. The effect of bending along the X and Y-axis on the performance of the proposed MIMO antenna is also analyzed where decent performance is observed. This makes the proposed flexible four-element MIMO antenna a potential candidate to be deployed in future smartphones.

Design and Analysis of Wideband Flexible Self-Isolating MIMO Antennas for Sub-6 GHz 5G and WLAN Smartphone Terminals