English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

In this work, bioceramic coatings were formed on Ti6Al4V titanium alloy using a combined technique of plasma electrolytic oxidation followed by gas detonation spraying of calcium phosphate ceramics, based on hydroxyapatite. Plasma electrolytic oxidation was carried out in electrolytes with various chemical compositions, and the effect of electrolytes on the macro and microstructure, pore size and phase composition of coatings was estimated. Three types of electrolytes based on sodium compounds were used: phosphate, hydroxide, and silicate. Plasma electrolytic oxidation of the Ti–6Al–4V titanium alloy was carried out at a fixed DC voltage (270 V) for 5 min. The sample morphology and phase composition were studied with a scanning electron microscope and an X-ray diffractometer. According to the results, the most homogeneous structure with lower porousness and many crystalline anatase phases was obtained in the coating prepared in the silicate-based electrolyte. A hydroxyapatite layer was obtained on the surface of the oxide layer using detonation spraying. It was determined that the appearance of α-tricalcium phosphate phases is characteristic for detonation spraying of hydroxyapatite, but the hydroxyapatite phase is retained in the coating composition. Raman spectroscopy results indicate that hydroxyapatite is the main phase in the coatings.

Creation of Bioceramic Coatings on the Surface of Ti–6Al–4V Alloy by Plasma Electrolytic Oxidation Followed by Gas Detonation Spraying