English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Plus monthly

Global: Zendy Tools annual

Global: Zendy Tools monthly

Global: Zendy Free Plan

This work tested two V2O5-WO3/TiO2 catalysts with different vanadium precursors for selective catalytic reduction (SCR) of flue gas NO using NH3 at 150–450 °C. While catalyst A was prepared using ammonium metavanadate (NH4VO3) through incipient impregnation, catalyst B was made according to the solvothermal method using vanadyl acetylacetonate (VO(acac)2) as the vanadium precursor. The catalytic evaluation for denitration was in a laboratory fixed bed reactor using simulated flue gas under conditions of a gas hourly space velocity (GHSV) of 40,000 h−1 and an NH3/NO molar ratio of 0.8. Without SO2 and water vapor in the flue gas at 200 °C, the realized NO conversion was 56% for catalyst A but 80% for B. The presence of 350 ppm SO2 and 10 vol. % water vapor in the flue gas slightly reduced the NO conversion over catalyst B, and its activity was stable in a 108-h continuous test at temperatures varying from 450 °C to 220 °C. Via fourier transformation infrared spectroscopy (FT-IR) and thermogravimetric (TG) analysis, it was shown that over catalyst B a dynamic balance between the formation and decomposition of ammonium sulfite or sulfate is built possibly at temperatures as low as 220 °C. For this catalyst there was a higher surface atomic concentration of vanadium and a higher ratio of V4+/(V4+ + V5+), while the NH3 adsorption test revealed more acidic sites on catalyst B. The study discloses a potentially new approach to prepare a V2O5-WO3/TiO2 catalyst with good performance for SCR of flue gas NO at 220–300 °C

Improved Low-Temperature Activity of V2O5-WO3/TiO2 for Denitration Using Different Vanadium Precursors