English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

Ru-Sn/TiO2 is an effective catalyst for hydrogenation of aqueous acetic acid to ethanol. In this paper, a similar hydrogenation process was investigated in a flow-type rather than a batch-type reactor. The optimum temperature was 170 °C for the batch-type reactor because of gas production at higher temperatures; however, for the flow-type reactor, the ethanol yield increased with reaction temperature up to 280 °C and then decreased sharply above 300 °C, owing to an increase in the acetic acid recovery rate. The selectivity for ethanol formation was improved over the batch process, and an ethanol yield of 98 mol % was achieved for a 6.7 min reaction (cf. 12 h for batch) (liquid hourly space velocity: 1.23 h−1). Oxidation of ethanol to acetic acid (i.e., the reverse reaction) adversely affected the hydrogenation. On the basis of these results, hydrogenation mechanisms that include competing side reactions are discussed in relation to the reactor type. These results will help the development of more efficient catalytic procedures. This method was also effectively applied to hydrogenation of lactic acid to propane-1,2-diol.

Hydrogenation of Aqueous Acetic Acid over Ru-Sn/TiO2 Catalyst in a Flow-Type Reactor, Governed by Reverse Reaction