English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Plus monthly

Global: Zendy Tools annual

Global: Zendy Tools monthly

Global: Zendy Free Plan

CO2 methanation is recognized as one of the best technologies for storing intermittent renewable energy in the form of CH4. In this study, CO2 methanation performance is investigated using Ni/Al2O3, Ru/Al2O3, and Ru-Ni/Al2O3 as the catalysts under conditions of atmospheric pressure, a molar ratio of H2/CO2 = 5, and a space velocity of 5835 h−1. For reaction temperatures ranging from 250 to 550 °C, it was found that the optimum reaction temperature is 400 °C for all catalysts studied. At this temperature, the maximum values of CO2 conversion, H2 efficiency, and CH4 yield and lowest CO yield can be obtained. With temperatures higher than 400 °C, reverse CO2 methanation results in CO2 conversion and CH4 yield decreases with increased temperature, while CO is formed due to reverse water-gas shift reaction. The experimental results showed that CO2 methanation performance at low temperatures can be enhanced greatly using the bimetallic Ru-Ni catalyst compared with the monometallic Ru or Ni catalyst. Under ascending-descending temperature changes between 250 °C and 550 °C, good thermal stability is obtained from Ru-Ni/Al2O3 catalyst. About a 3% decrease in CO2 conversion is found after three continuous cycles (74 h) test.

Experimental Study on CO2 Methanation over Ni/Al2O3, Ru/Al2O3, and Ru-Ni/Al2O3 Catalysts