English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Plus monthly

Global: Zendy Tools annual

Global: Zendy Tools monthly

Global: Zendy Free Plan

In our previous study, intercritical quenching from the dual-phase region of ferrite and austenite regions, which is called lamellarizing (L) treatment, brought a clear improvement of balance between the strength and toughness of Cu-containing low alloy steel based on American Society for Testing and Materials (ASTM) A707 5L grade. Moreover, the results imply that the reverse transformation behavior during L treatment is very important in order to optimize the L treatment temperature. Hence, the purpose of this paper is to clarify the mechanism by which L treatment improves the mechanical properties in terms of reverse transformation behavior. Additionally, offshore structures require good weldability, because the structures generally have a lot of weld joints. Therefore, weldability was also investigated in this study. The investigation revealed that coarse Cu precipitates are observed in the not-transformed α phase, so the strength tendency in relation to the L treatment temperature is relevant to the area ratio of the not-transformed α phase and the transformed γ phase during L treatment. From the in situ electron back scatter diffraction (EBSD) results, it is believed to be possible to enhance the mechanical properties of Cu-containing low alloy steel by controlling the area ratio of the reverse-transformed gamma phase and selecting the appropriate L treatment temperature. Furthermore, the long part forging of Cu-containing low alloy steel has a good weldability, since the maximum hardness of the heat-affected zone (HAZ) is less than 300 HV, and the HAZ of steel has a good crack tip opening displacement (CTOD) property with less than 2.3 kJ/mm of heat input of GTAW.

Effect of Intercritical Quenching Temperature of Cu-Containing Low Alloy Steel of Long Part Forging for Offshore Applications