English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

To assess the influence of an intermediate coarse layer on the slope stability during heavy rainfall, knowledge about water movement and how slope failure occurs is important. To clarify the characteristics of water infiltration in a multi-layered slope and assess its influence on the slope failure modes, eight groups of physical slope models were investigated. It was found that the unsaturated hydraulic conductivity in the coarse layer (5.54 × 10−6 cm/s) was much lower than that of the fine layer (1.08 × 10−4 cm/s), which resulted in the capillary barrier working at a lower water content. Intermediate coarse layers embedded between finer ones may initially confine the infiltration within the overlying finer layers, delaying the infiltration and eventually inducing a lateral flow diversion in the inclined slope. Two different failure modes occurred in the model experiments: surface sliding occurred at the toe in the single-layer slope group and piping occurred at the toe in the multi-layered slope as the rainfall water accumulated, was diverted along the interface, and then broke through in the downslope direction of the intermediate coarse layer. The lateral flow diversion caused by the capillary barrier and the tilt angle may be the major factors influencing the difference of the failure modes. The result also revealed that the coarser layers may have negative effects on the slope stability.

Physical Model Experiments on Water Infiltration and Failure Modes in Multi-Layered Slopes under Heavy Rainfall