English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

A simple and rapid test has been developed to quantitatively measure the migration of antimony (Sb) and germanium (Ge) from polyethylene terephthalate (PET) products. The PET product was soaked in 4% acetic acid (2 mL/cm2) for 30 min at 60 degrees C and 95 degrees C. The test solution was analyzed by ICP-MS. Recoveries of spiked Sb (0.025 microg/mL) and Ge (0.05 microg/mL) were 101% and 100%, respectively, with relative standard deviations (RSDs) of 2.3% and 1.7%. In ten successive analyses, Sb and Ge in the 4% acetic acid solution were analyzed with RSDs of 1.7% and 2.2%. Sb and Ge were not subject to interference from other elements simultaneously present in the 4% acetic acid solution. This method is simple, rapid and safe, requiring no pretreatment or use of the hazardous solvent carbon tetrachloride. Therefore, this test is a useful method to analyze Sb and Ge migration from PET products.

Improved Test for the Migration of Antimony and Germanium from Polyethylene Terephthalate