English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

Use your smartphone to scan this QR code and download this article ABSTRACT Multilevel voltage source inverters (VSIs) have been used for several decades thanks to their advantages comparedwith traditional two level VSI. Among various types ofmultilevel configuration, the T-type neutral-point-clamped VSI (3L TNPC VSI or 333-type VSI) has gained the attention in recent years. Due to the unique structure, the 333-type VSI has critical issues in reliability in operation such as switch-open-circuit (SOC) and switch-short-circuit (SSC), which lead to several unrequired issues, for instance, reduction of system performance, distorted and unbalanced output voltages and currents, or triggering the protection circuits. In some applications, the amplitude reduction and harmonics distortion of output voltages in SOC faults are not acceptable. Therefore, it is necessary to develop a pulse-width modulation (PWM) algorithm for 333-type VSI working under SOC fault which guarantees the desired output fundamental component voltage. The simultaneous SOC fault on two neutral-point-connected legs in the 333-type VSI may cause a large reduction in the output voltage. Under this circumstance, the 333-type VSI becomes an asymmetrical one called 322-type VSI. Certain studies regarding to the operation of 333-type VSI under SOC faults have been carried out. However, these studies requiremore semiconductor devices in order to create a redundant switching circuit. This leads to higher system cost with reduced inverter efficiency due to the additional loss. In this study, two carrier-based pulse-width modulation (CBPWM) techniques, i.e. 322-sinusoidal PWM (322-SPWM) and 322-medium offset CBPWM (322-MOCBPWM) are proposed for 322-type VSI. The proposed techniques are firstly simulated inMATLAB/Simulink and then implemented on a hardware setup. Performances of the proposed techniques are evaluated in terms of total harmonic distortion (THD) and weighted-THD (WTHD) of output voltages. Simulation results show that considering the worst output voltage under SOC fault, vBC, the proposed 322-SPWM technique could improve the THD by 40% and the WTHD by 94% compared with the uncompensated case with m=0.8. The corresponding results of 322-MOCBPWM technique are 42% and 96%, respectively. Characteristics of THD and WTHD values are also presented for demonstration the effectiveness of the proposed algorithm.

phát triển khoa học and công nghệ - kỹ thuật and công nghệ

A study on performances of carrier-based pulse-width modulation techniques for three-phase three-level t-type neutral-point-clamped inverter under switch-open-circuit fault on two neutral-point-connected legs