English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

The effects of low dosage sodium sulfite ( Na2SO3) pretreatment (0, 0.6 and 1.2% on bone dry wood, pH 9) at two different refining temperatures (4.6 and 6.4 bar(g) refiner housing pressure) were evaluated for production of thermomechanical pulp with a double disc refiner in mill scale using Norway spruce wood at Braviken paper mill (Holmen Paper AB, Sweden). The sulfonate content of the pulps was not affected by the different refining temperatures and was 0.29% (as Na2SO3 equivalents) for the highest sulfite addition. Tensile index at constant SEC was increased by 3.2 Nm/g when the refining temperature was increased, and by 8.6 Nm/g when 1.2% sodium sulfite was added. The effects were additive and led to an increase in tensile index of similar to 12 Nm/g at constant SEC when combined and would enable a reduction in SEC of 380 kWh/bdt (similar to 20%) to similar tensile index. The degree of delamination and internal fibrillation of the fibers was increased by both increased refining temperature and sulfite addition. Pulp brightness was slightly reduced (<= 0.4% ISO) by increased refining temperature and increased (2-3% ISO), when sodium sulfite was added. Spectra of reflectance factors (360-740 nm) were used to study the optical properties of produced pulps

Low dosage sulfite pretreatment at different refining temperatures in mill scale TMP production