English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Tools annual

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools monthly

Global: Zendy Plus monthly

Presents the access of premium content as premium feature

Premium Content

Global: Zendy Plus annual

Global: Zendy Free Plan

This study investigated the effect of use of a cooling slope on the microstructure, hardness and wear behavior of Al-7Si-Mg alloy. The Al-7Si-Mg alloy was cast with and without a cooling slope at a pouring temperature of 640 °C. Examination with optical and electron microscopes showed that the microstructure of cast samples using the cooling slope comprised fine and globular primary α-Al phase with homogeneous distribution of eutectic phase, while conventionally cast samples featured coarse and dendritic primary α-Al phase. The wear resistance of the cast sample was significantly better with cooling slope casting. The wear mechanism was found to be a combination of adhesion, delamination, oxidation and abrasive wear for both cooling slope- and conventionally cast samples. The wear mechanisms of cast samples both with and without cooling slope are similar and follow Archard's law. The cooling slope-cast samples with fine and globular α-Al phase, high hardness and low specific wear rate ( K′ ) showed the highest wear resistance of 10.08 × 10 −5  mm 3  N −1  m −1 .

Dry wear behavior of cooling-slope-cast hypoeutectic aluminum alloy