English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Zendy Open

Presents the pdf analysis as premium feature

PDF Analysis

Insights

Presents the summarisation as premium feature

Summarisation

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the zaia usage as premium feature

ZAIA

Zendy Tools

Zendy Plus

Presents the access of premium content as premium feature

Premium Content

CrAlYN/CrN nanoscale multilayer coatings were deposited on γ-TiAl substrate material using high power impulse magnetron sputtering technology. The nitride coating provided effective oxidation protection to γ-TiAl at 850 °C for exposure time periods exceeding 2 000 cycles of 1 h dwell time at high temperature in air. High oxidation resistance was also observed at 900 °C. After exposure to air at 850 °C for 300 h, coated tension specimens exhibited a reduction in fatigue strength of about 70 MPa compared to the bare γ-TiAl alloy. Zirconia topcoats produced by electron-beam physical vapour deposition were well adherent to the CrAlYN/CrN coating with an oxy-nitride overcoat. When thermally cycled at 900 °C, the lifetime of this thermal barrier coating system on γ-TiAl exceeded 1 000 1 h cycles. Below cracks in the nitride coating, the substrate was oxidised and protrusions of an outer oxide scale with columnar structure formed.

Oxidation and fatigue behaviour of γ-TiAl coated with HIPIMS CrAlYN/CrN nanoscale multilayer coatings and EB-PVD thermal barrier coatings