English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

The tensile and fatigue properties of ultra-low carbon steel after HPT-straining at a rotation-speed of 0.2 rpm under a compression pressure of 5 GPa were investigated. Elongated grains with 300 nm thickness and 600 nm length with high dislocation density were formed by the HPT-straining. The obtained Vickers microhardness was around 3.6 GPa. The engineering tensile strength of the HPT-processed ultra-low carbon steel for 5 and 10 turns was 1.9 GPa, which is similar to the value of maraging high-alloy steels. The elongation increased with strain (at 5 to 10 turns). The increase in elongation is caused by the reduction of the stress concentration due to the existence of continuously recrystallized grains. The fatigue strengths of HPT-processed specimens were twice as high as those of the 90 % cold-rolled specimen in the low-cycle fatigue region, whereas in the high-cycle fatigue region the fatigue strengths were not so different due to the high notch sensitivity of the HPT-processed specimens.

Tensile and fatigue properties of sub-microcrystalline ultra-low carbon steel produced by hpt-straining