English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Zendy Open

Presents the pdf analysis as premium feature

PDF Analysis

Insights

Presents the summarisation as premium feature

Summarisation

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the zaia usage as premium feature

ZAIA

Zendy Tools

Zendy Plus

Presents the access of premium content as premium feature

Premium Content

In this study, it was aimed to determine and compare the sinterability of aluminum-SiO 2  composites by conventional and fast sintering methods and to examine their tribological properties after the sintering process. For this purpose, 1, 3, 5, 9, and 15 wt.-% SiO 2  reinforced aluminum matrix composites were sintered by a conventional and induction sintering method at 600 °C after uniaxial cold pressing under 200 MPa pressure. The sintering was performed for 30 minutes for the traditional method and 5 minutes for induction sintering. After the sintering, the microstructures of the samples were examined, and their sintered densities and hardness were determined. In addition, the tribological properties of the samples were investigated by the pin-on-disc method, and the worn surfaces were examined after the tests.

Ultra-high frequency induction and conventional sintering of Al-SiO 2 composites: A comparative study