English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Zendy Open

Presents the pdf analysis as premium feature

PDF Analysis

Insights

Presents the summarisation as premium feature

Summarisation

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the zaia usage as premium feature

ZAIA

Zendy Tools

Zendy Plus

Presents the access of premium content as premium feature

Premium Content

Fused deposition modeling is a layer-by-layer 3D printing technology used to additively manufacture polymers. A major benefit of 3D-printed polymers is the option of tailoring their mechanical properties by varying the process parameters. In addition, the present study investigates the influence of the filling degree (50 % or 100 %) and the nozzle temperature during manufacturing on the mechanical properties of 3D-printed poly-ether-ether-ketone (PEEK) material. PEEK samples were built either compact (filling degree 100 %) or closed-cell porous (filling degree 50 %), using three different nozzle temperatures (390 °C, 430 °C and 470 °C). In static bending tests, the bending properties were evaluated and compared with injection molded PEEK samples. Bending strength and modulus increased up to 21.1 %, when the nozzle temperature was increased and up to 40.8 % when the volumetric filling was altered. The results indicate that nozzle temperature and volumetric filling can be altered to tailor the bending properties of 3D-printed PEEK for particular applications. However, the mechanical properties of the 3D-printed samples determined in the current study could not achieve those of the properties of the injection molded PEEK.

Influence of nozzle temperature and volumetric filling on the mechanical properties of 3D-printed PEEK