English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Zendy Open

Presents the pdf analysis as premium feature

PDF Analysis

Insights

Presents the summarisation as premium feature

Summarisation

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the zaia usage as premium feature

ZAIA

Zendy Tools

Zendy Plus

Presents the access of premium content as premium feature

Premium Content

In this study, the static strain aging behavior of a bake hardening steel (BH 220), suitable for cold forming and widely used in the automotive sector was investigated. Tensile specimens prepared from BH 220 steel were first subjected to a 40 minute solution treatment at 920 °C and 970 °C and then cooled in water to generate various grain sizes. Both as-received and heat-treated samples were pre-strained for 3 % tension and then aged at 180 °C for 10, 20, 30, 60, 180 and 300 min. Tensile tests were carried out to obtain the yield strength (YS), ultimate tensile strength (UTS), elongation (%) and bake hardening value (δY) of aged as-received and heat treated samples. Results indicated that BH 220 steel exhibited static strain aging behavior under as-received and heat-treated conditions. Heat treated samples showed higher susceptibility to static strain aging as compared to the as-received samples. Increased grain size in all the as-received and heat-treated samples decreased the YS and UTS but increased the bake hardening value δY.

Effect of different grain sizes on the static strain aging behavior of bake hardening steel