English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

Use of composite materials is growing rapidly because they offer weight reduction, durability and better fatigue life as compared to metals. Despite of their advantages, there are some problems associated with the use of composites, and impact resistance is one of the weak areas in composites. Low speed impact damage has been the focus of attention of researchers for quite some time but studies of high speed impact damage is still in its preliminary stages. In this study, effects of ballistic impact on thin and thick composite panels were investigated. Damage due to high speed impact in composites is a complex phenomenon and it is diflScult to analytically model all the events taking place during the impact. An experimental approach was used to study the damage from high speed impact and the Finite Element analysis was performed to understand the damage sequence. Thin symmetric quasi-isotropic and cross-ply laminates consisting of up to 16 layers were studied using experimental vibration and Finite Element analysis. It was found that frequency response of damaged plates is dependent on the stacking sequence of the laminate. Results also show that the natural frequencies of the damaged plates decrease for few initial modes and increase for some of the higher modes. It was observed that cross-ply laminates exhibit very little effect on the natural frequencies due to damage. Thick symmetric quasi-isotropic and cross-ply laminates consisting of 56 plies were also studied. Results demonstrate that damage size is dependent more on the shape and size of the impactor, rather than the impact energy. Faster bullets cause less damage as

Effects of ballistic impact damage on thin and thick composites