English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

Building materials are the main products made of coal gangue and coal fly ash. Most of these products contain various heavy metals such as Pb, Cd, Cr, Hg, which are needed to measure in the purpose of safe using and environment protection. In our work, we established a set of method to pre-treat the products by microwave digestion technique and measure the concentration of heavy metals by atomic absorption spectrophotometer. And we measured three products from Shuozhou City, Shanxi Province and found that the content of one or two kinds of heavy metals are high, which should be paid great attention in its application for their high environmental risks. Introduction Rapid development of industry and economy results in a great amount of solid wastes generated and disposed, which becomes one of the most serious environmental problems in most countries in the world [1, 2]. Coal gangue and coal fly ash are two kinds of problematic wastes discharged from coal mining, processing and utilization [3, 4] in most coal producing and using area. The utilization of coal gangue and coal fly ash to produce products with high value attracts much attention of scientists and the engineers. Coal gangue and fly ash generally contains high contents of SiO2 and Al2O3 and some other metal element. Usually, coal gangue and coal fly ash can be made into various building materials and products [5], most of which contain various heavy metals such as Pb, Cd, Cr, Hg, Ni and Cu originating from different industrial solid wastes. When present in excess or under the wrong conditions, heavy metals can produce multiple toxic effects [6-8]. Many literatures reported in coal gangue and fly ash storage field the surrounding soil polluted by heavy metals, especially these with significant biological toxicity, such as lead (Pb), cadmium (Cd), chromium (Cr) and mercury (Hg). However people pay little attention on the heavy metal pollution for the products made from solid waste. Therefore it is very important to detect the heavy metals of the products in view of environment risk control. Atomic absorption spectrometry (AAS) is the main method for the determination of cadmium, chromium and lead. In this work we measured the main heavy metals, Pb, Cd, Cr and Hg, in three typical products made from coal gangue and coal fly ash from Shuozhou City, Shanxi Province. From the results we can provide some advice for the safe using of these products. Experimental Samples. Herein, the measured samples are three products from Shuozhou City, fly ash lightweight insulation brick (Sample 1), lightweight composite wall panel (Sample 2) and ceramic fiber blanket (Sample 3). 3rd International Conference on Machinery, Materials and Information Technology Applications (ICMMITA 2015) © 2015. The authors Published by Atlantis Press 1224 Apparatus and Reagents. We use MDS-200AT microwave digestion system to dissolve the solid sample thoroughly, and use TAS-990 type atomic absorption spectrophotometer to detect the concentration of heavy metals. The concentration of lead (Pb), cadmium (Cd), chromium (Cr), mercury (Hg) standard solution are all 1000 mg/L. The reagents used were analytical pure, and the experimental water was distilled water for two times. Working Condition of Apparatus. The testing wavelength of the atomic absorption spectrophotometer, the atomization methods and the background correction are shown in Table 1. Table 1. The working condition of the atomic absorption spectrophotometer Element Wavelength [nm] Atomization Method Background Correction Pb 283.3 Air acetylene flame Deuterium lamp Cd 228.8 Air acetylene flame Deuterium lamp Cr 357.9 Air acetylene flame Deuterium lamp Hg 253.7 Hydride Measuring Procedure. Take a block of the fly ash lightweight insulation brick and then ground it into fine powder. Weigh 2 g powder and put it into digestion tank; add 30 mL nitric acid (HNO3), 4.0 mL hydrofluoric acid (HF) into the tank and then digest the sample for the first time according to the procedure shown in Table 2 with microwave digestion system. Table 2. The first-step digestion procedure Sequence Pressure (MPa) Time (min) 1 0.5 1.0 2 1.0 1.0 3 1.5 2.0 4 2.0 2.0 5 2.5 10.0 After digestion procedure the sample is cooled down to room temperature. Then quickly add 35 mL saturated boric acid (H3BO3) solution, seal the digestion tank and digest the sample for the second time as Table 3 and then cool down to room temperature. Table 3. The second-step digestion procedure Sequence Pressure (MPa) Time (min) 1 0.5 1.0 2 1.0 5.0 During the decomposition of the sample in the first digest procedure, Al(III), Ca(II) and Mg(II) generate the corresponding fluoride which are almost insoluble. So after cooling boric acid is added for second step digestion, so that the fluoride will generate soluble ions. After the digestion is finished and the temperature in the tank is reduced to room temperature, the digestion tank is taken out. The digestion solution is colorless and transparent. Transfer it into a 100 mL volumetric flask, and rinse the tank with water. Then the solution is diluted to the scale, shake the solution until it is uniform. Test the concentration of Pb, Cd, Cr and Hg of the solution with the atomic absorption spectrophotometer, and the original concentration of these four heavy metal elements in the products can be calculated as the following Eq. 1. 1000 0.1 2.0 sol C C = × × (1) here C is the concentration of heavy metal elements in the original products, and Csol is the concentration of the testing solution. Lightweight composite wall panel and ceramic fiber blanket are treated and measured with the same procedure as the fly ash lightweight insulation brick above.

Determination of Pb, Cd, Cr and Hg in Coal Gangue and Fly Ash Product with Microwave Digestion and Atom Absorption Spectrometry