English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

In this paper, a W-band single-pole four-throw (SP4T) switch for multichannel high power transceiver chipset design is proposed based on a standard commercial 100 nm GaAs power pseudomorphic high electron mobility transistor (pHEMT) technology. Process used in this work is optimized for use in power amplifier (PA) design, resulting in a larger drain electrode capacitance. In order to reduce the effect of large drain capacitance for switch design, a proper series capacitor is introduced. This capacitor can not only reduce the overall capacitance of the turn-off state transistor but also resonate with the parasitic inductance of the turn-on state transistor to improve the isolation. As known, a short stub is adopted to compensate the remaining parasitic capacitance. For verification, a prototype is fabricated and measured. The measured results are in good agreement with the simulated ones. The fabricated SP4T switch achieves a bandwidth of 75 GHz–96 GHz, with an insertion loss and isolation about 4.8 dB and 28 dB, respectively. The fabricated switch also realizes a Pin1 dB about 22 dBm.

W-BAND SINGLE-POLE FOUR-THROW SWITCH FOR MULTICHANNEL HIGH POWER TRANSCEIVER CHIPSET DESIGN