English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Zendy Plus

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Zendy Tools

Zendy Open

: Three geometries are explored for injecting CO2 into the boundary layer of a sharp five degree half-angle cone. The impact of the injection geometry, namely discrete injection holes or a porous conical section, on tripping the boundary layer is examined, both with and without injected flow. The experiments are conducted at Caltech's T5 reflected shock tunnel. Two different air free-stream conditions are explored. For the discrete-hole injectors, the diameter for the injection holes is 0.75 mm nominally and the length to diameter ratio is about 30. One injector has a single row of holes and the other has four rows. With the 4-row geometry fully turbulent heat transfer values are measured within four centimeters of the last injection row for both free-stream conditions. The 1-row injector results on a reduction of 50% in the transition Reynolds number. The porous injector does not move the transition Reynolds number upstream by itself with no injection flow.

On the impact of injection schemes on transition in hypersonic boundary layers