English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

This paper deals with the synthesis and the characterization of reverse osmosis membranes reached by barium titanium oxide nanoparticles. A composite membrane containing BaTiO3 nanoparticles (NPs) was prepared by the in situ interfacial polymerization (IP) process on porous polysulfone supports. Aqueous m-phenyl diamine (MPD) and organic trimesoyl chloride (TMC)-NPs mixture solutions were used in the IP process. BaTiO3 NPs with a size between 100–200 nm were used as the fillers to fabricate nanocomposite membranes at concentrations ranging from 0.001% to 0.01% wt%. The membranes were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), atomic force microscope (AFM) and contact angle technique. Their performances were evaluated based on the water permeability and salt rejection. Results indicated that the BaTiO3 nanoparticles are well dispersed in polyamide (PA) layer and improved membrane performance under optimal concentrations. By changing the content of filler (by introducing different concentration of BaTiO3 nanoparticles inside the Reverse Osmosis Membrane (0.001% to 0.01% wt%), hydrophilicity and roughness of the composite membranes were increased. Notably, the permeate water flux increased from 26 to 42 L/m 2 h at BaTiO3 concentration of 0.009% with the maintaining of sodium chloride (NaCl) high salt rejection of 98%. These results were obtained with initial NaCl concentration of 2000 ppm and under pressure of 225 psi. For the hydrophilicity, the contact angle was decreased from 73° to 24°.

Synthesis and characterization of reverse osmosis membranes modified with BaTiO3nanoparticles to improve performance

Synthesis and characterization of reverse osmosis membranes modified with BaTiO₃nanoparticles to improve performance