English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Plus monthly

Global: Zendy Tools annual

Global: Zendy Tools monthly

Global: Zendy Free Plan

This thesis deals with the operation of and winding short-circuit fault detection in a Doubly-Fed Induction Generator (DFIG) based Wind Turbine Generator System (WTGS). Both the faulted and faultless condition of operation has been studied, where the focus is on the electrical part of the system. The modelled electrical system is first simulated and the developed control system is then validated on a test bench. The test-bench component dimensioning is also discussed.The faultless condition deals with the start-up and power production mode of operation. Control design based on the Proportional Integral (PI) control technique has been compared for power and torque control strategies against the Linear Quadratic Gaussian (LQG) control technique, at different operating points through the variable-speed region of WTGS operation following the maximum power curve of the system. It was found that the torque control strategy offered less degradation in performance for both the control techniques at operating points different for the one for which the control system was tuned. The start-up procedure of the DFIG based WTGS has been clarified and simplified. The phase difference between the stator and the grid voltage, which occurs due to the arbitrary rotor position when the rotor current control is activated, is minimized by using a sample-and-hold technique which eliminates the requirement of designing an additional controller. This method has been validated both in simulation and experiments.The faulted condition of operation deals with the turn-turn short-circuit fault in the phase winding of the generator. The model of the generator, implemented using the winding-function approach, allows the fault to be created online both in a stator and a rotor phase. It has been demonstrated that the magnitude of the current harmonics, used extensively in literature for the Machine Current Signature Analysis (MCSA) technique for winding short-circuit fault detection, is very different when the location of the fault is changed to another coil within the phase winding. This makes the decision on the threshold selection for alarm generation difficult. Furthermore, the control system attenuates the current harmonics by an order of magnitude. This attenuation property is also demonstrated through experiments. The attention is then shifted to the negative-sequence current component, resulting from the winding unbalance, as a possible fault residual. Its suitability is tested in the presence of noise for scenarios with different fault locations, fault severity in terms of the number of shorted-turns and grid voltage unbalance. It is found that due to the presence of a control system the magnitude of the negative-sequence current, resulting from the fault, remains almost the same for all fault locations and fault severity. Thus, it was deemed more suitable as a fault residual. In order to obtain a fast detection method, the Cumulative Sum (CUSUM) algorithm was used. The test function is compared against a threshold, determined on the basis of expected residual magnitude and the time selected for detection, to generate an alarm. The validation is carried out with noise characteristics different from the ones used during the design and it is shown that the voltage unbalance alone is not able to trigger a false alarm. In all the scenarios considered, the detection was achieved within 40 ms despite the presence of measurement filters.Doctorat en Sciences de l'ingénieurinfo:eu-repo/semantics/nonPublishe

CUSUM based Fault Detection of Stator Winding Short Circuits in Doubly-Fed Induction Generator based Wind Energy Conversion Systems