English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

Intisari — Gangguan-gangguan yang sering terjadi pada operasi sistem tenaga listrik dapat mengakibatkan terganggunya penyaluran tenaga listrik ke konsumen, sehingga menimbulkan arus hubung singkat yang cukup besar, untuk menghindari akibat gangguan tersebut diperlukan perlindungan jaringan dengan memasang suatu relay proteksi. Tujuan dari penelitian ini adalah melakukan simulasi menggunakan software ETAP dan perhitungan arus hubung singkat serta setting waktu kerja relay arus lebih. Metode yang digunakan untuk menganalisis gangguan hubung singkat yaitu 1) identifikasi data, 2) simulasi, 3) perhitungan, 4) hasil dan analisis serta 5) kesimpulan. Hasil penelitian, simulasi software ETAP arus gangguan hubung singkat maksimum pada jarak 25% dengan arus gangguan tiga fasa sebesar 2877.341 A, dua fasa sebesar 2672.708 A, dan satu fasa sebesar 2491.835 A. Gangguan minimum pada jarak 100% dengan arus gangguan tiga fasa sebesar 502.032 A, dua fasa sebesar 434.671 A, dan satu fasa sebesar 347.035 A. Sedangkan untuk hasil simulasi waktu kerja relay arus lebih sisi incoming sebesar 1 detik dan sisi outgoing sebesar 0.55 detik, hasil perhitungan waktu kerja relay arus lebih sisi incoming sebesar 0.99 detik dan sisi outgoing sebesar 0.54 detik.Kata kunci — Gangguan Hubung Singkat, relay arus lebih, ETAP Power Station 12.6.0.  Abstract — Interferences that often happen in an operation system of electric power can cause in disruption of distribution the electric power to consumers, so it causes quite large shor-circuit current. To avoid the impact of that inrerferences,setting relay portection to protect the network is needed. The purpose of the reserch is doing a simulation using ETAPsoftware, calculating the short-circuit current, and setting the working time of excess-current relay. The method that used to analyze the interferences of short-circuit current are : 1) data identifying, 2) Simulation, 3) calculation, 4) result and analysis and, 5) conclution. The results of the research show that the maximum interferences of short -circuit current at 25% of distance with three phase Interferences is 2877,341 A, two -phase is 2672,708 A, and one-phase is 2491,835 A. The minimum Interferences at 100% distance with three phase Interferences is 502,032 A, two -phase is 434,671 A, and one-phase is 347,035 A. And the result of the simulation time of excess-current relay on incoming side is 1 second and on feeder side is 0.55 second, the results of the calculation working time of excess-current relay on the incoming side are 0.99 second and on the feeder, a side is 0.54 secondKeywords— short circuit, over current relay, ETAP power station 12.6.0

Setting Kerja Waktu Relay Arus Lebih pada Penyulang Kikim di Gardu Induk Sungai Juaro