English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

The effects of alloying elements on the hardenability, toughness and the resistance to stress corrosion cracking have been evaluated in the 1 to 3 mass%Cr low alloy steels for 1 600 mmφ class large-sized turbine rotor forgings for geothermal power generation. The chemical composition suitable for the rotor forging which satisfied the required material properties and which reduced the C-segregation in the center portion of the ingot was chosen under the restrictive condition on the upper limit of Ni and Cr contents suitable for turbine rotors in a geothermal corrosive environment. An 8 ton sand mold ingot of the selected chemical composition was manufactured and the reduction of the C-segregation was verified. It is concluded that the selected 2.25Cr-0.9Ni-0.6Mo-0.25V-0.15Si-1.0Mn-0.25C steel (mass%) is hopeful as the chemical composition for large-sized turbine rotor forgings for geothermal power generation.

Effects of Alloying Elements on the Hardenability, Toughness and the Resistance of Stress Corrosion Cracking in 1 to 3 mass% Cr Low Alloy Steel