English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

The amount of strain provided by shot peening (SP) was estimated by comparing the shot-peened surface structure to the cold-rolled structure. The grain size of recrystallized structure beneath the shot-peened nanocrystalline (NC) surface after annealing was similar to that of the specimen after cold-rolling (equivalent strain eeq=ca. 6) and annealing. The eeq larger than 6 seems to be given to the surface region by SP. This strain amount is consistent with the necessary condition (eeq>7) to produce NC structure proposed in the previous study. The large strain gradient is also generated at the shot-peened surface. The strain gradient has been suggested as one of important factors on strengthening and on grain refinement. The deformation by SP is complex; the role of strain gradient was investigated by using high-pressure torsion (HPT) process. The maximum hardness (Hv 5 GPa) in the Fe–0.03mass%C disk after HPT-straining was twice higher than the hardness (2.4 GPa) obtained by cold-rolling. At the center of HPT-processed disk, where shear strain is nominally zero, the hardness increased up to a saturation value of 3.3 GPa. These results in the HPT experiment show that strain gradient contributes to strengthening and to grain refinement. However, the grain refinement was saturated with around 200 nm in layered grain thickness although the HPT-processed disk was applied large strain and strain gradient. This suggests that not only strain gradient and strain but also other deformation conditions are necessary to form NC structure.

Formation of Surface Nanocrystalline Structure in Steels by Shot Peening and Role of Strain Gradient on Grain Refinement by Deformation