English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

The viscosities of CaO-SiO2-Al2O3-MgO-FeO slag were measured under conditions of C/S=1.35-1.45, 10-18 mass% Al2O3, 3.5-10 mass% MgO and 5 mass% FeO. The bosh slag with 10 mass% Al2O3 content had the lowest melting temperature and the widest solid-liquid coexisting region at about 5 mass% MgO, while in case of 14 mass% Al2O3, an increase in a MgO content from about 3.5 to 10 mass% raised the melting point of bosh slag. The viscosity of bosh slag also exhibited a minimum value at about 7 mass% MgO at temperatures above 1 723 K. However, it was not significantly changed with varying MgO content. On the hand, with increasing Al2O3 content, the viscosity of bosh slag increased at a fixed C/S and MgO content. Based on the melting temperature and the behavior of viscosity at a fixed temperature, it could be proposed that the MgO and Al2O3 contents in bosh slag should be maintained around 5 and 10 mass%, respectively, for high pulverized-coal ratio (PCR) and low slag volume operations in blast furnace.

Influence of MgO and Al2O3 Contents on Viscosity of Blast Furnace Type Slags Containing FeO