English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

With a view to developing a new process for the production of metallic titanium (Ti) powder, the preform reduction process (PRP) based on the calciothermic reduction of Ti concentrates or ore (TiO 2 ) was investigated in this study. A Ti feed preform was fabricated at room temperature by casting and drying a prepared slurry that constituted a mixture of Ti concentrates (upgraded ilmenite (UGI), 97.1% TiO 2 ) or Ti ore (rutile, 96.4% TiO 2 with iron (Fe) as the major impurity), flux CaCl 2 ), and binder. In some experiments, carbon (C) powder was added into the slurry for an efficient Fe removal. The fabricated feed preform was calcined at 1273 K for removing the water and binder present in the preform. During the calcination of the feed preform, some metal impurities such as Fe were removed by selective chlorination. Multiple pieces of the sintered preform were then reacted with metallic calcium (Ca) vapor at 1273 K in a stainless steel reaction vessel, and Ti oxide (TiO 2 ) in the preform was reduced to metal. After reduction, the reduced preform was subjected to a leaching process using an acetic acid solution and a hydrochloric acid solution in order to remove the by-product calcium oxide (CaO), excess reductant Ca, and other impurities in the sample. After leaching, the obtained powder was then rinsed and dried; this powder was shown to be metallic Ti with a purity of 99% up. It was experimentally demonstrated that PRP is a feasible technique to produce metallic Ti powder directly from Ti concentrates or ore.

Production of Titanium Powder by the Calciothermic Reduction of Titanium Concentrates or Ore Using the Preform Reduction Process