English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

The aim of this study is to explore the two different constituents of submicron-sized copper and chromium powders as Cr50Cu50 alloy materials. The research imposes various vacuum hot-press sintering temperatures (950°C, 1000°C, 1050°C and 1100°C) and pressures maintained at 12MPa for 1 h, respectively. The experimental results show that the optimal parameters for the hot-press sintering of Cr50Cu50 alloys are 1050°C at 12MPa for 1 h. The relative density reaches 96.09% and the apparent porosity decreases to 0.12%. Moreover, the hardness and TRS (transverse rupture strength) values increase to HV0.2 198.82 (HRB 91.07) and 910.04MPa, respectively. The results of this study also indicate that the closed pores are effectively reduced and the mechanical properties of the Cr50Cu50 alloys are dramatically improved by increasing the temperature of the hot-press sintering process. Moreover, the optimal hot-press sintered Cr50Cu50 alloys also possess a dense microstructure and good electrical conductivity. The resistivity is decreased to 5.89 © 10163·cm and the ICAS is enhanced to 29.27%. [doi:10.2320/matertrans.M2015088]

Investigation of Submicron Powder Fabricated Cr50Cu50 Alloys Using Various Vacuum Hot-Press Sintering Temperatures