English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Plus monthly

Global: Zendy Tools annual

Global: Zendy Tools monthly

Global: Zendy Free Plan

Using electrodeposition and flip-chip bonding, a cross-plane thin film device consisting of 242 pairs of the electrodeposited n-type Bi­Te and p-type Sb­Te thin film legs was successfully fabricated. The electrodeposited Bi­Te films with the thickness of 2.5­20.2 μm exhibited the Seebeck coefficients of 152 to 159μV/K and the power factors of 5.5­5.1 © 1014W/m·K2. While the Seebeck coefficient of the Sb­Te film varied from 276 to 485μV/K, the power factor was changed from 81 © 1014 to 50 © 1014W/m·K2 with increasing the film thickness from 2.2 to 20.5 μm. The internal resistance of the thin film device consisting of 242 pairs of the electrodeposited n­p thin film legs was measured as 3.7K3. The open-circuit voltage and the maximum output power of the thin film device were 0.294V and 5.9μW, respectively, with the temperature difference of 22.3K across the hot and cold ends of the thin film device. [doi:10.2320/matertrans.M2012265]

Thermoelectric Thin Film Device of Cross-Plane Configuration Processed by Electrodeposition and Flip-Chip Bonding