English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

Dynamic impact response of Inconel 718 alloy is studied at temperatures ranging from  150 to 550  C and strain rates in the range of 1000 to 5000 s  1 using a compressive split Hopkinson pressure bar. It is found that the flow stress increases with increasing strain rate, but decreases with increasing temperature. The highest work hardening rate is observed in the specimen at the lowest temperature ( 150  C) and the highest strain rate (5000 s  1 ). However, the work hardening rate is weakened by the deformation-induced temperature rise under high strain and strain rate conditions. The strain rate sensitivity increases with increasing strain rate, but decreases with increasing temperature. The activation energy varies as a function of the strain rate and temperature, and has a maximum value of 40 kJ/mol. The greatest thermal softening effect occurs at the highest strain rate of 5000 s  1 and temperatures in the range  150 25  C. The microstructural observations confirm that the mechanical response of the Inconel 718 specimens is directly related to the effects of the strain rate and temperature on the evolution of the impacted microstructure. [doi:10.2320/matertrans.M2011130]

Dynamic Impact Response of Inconel 718 Alloy under Low and High Temperatures