English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

This study investigated the influence of rhenium on the mechanical behavior and fracture mechanism of a fine-grain Mar-M247 superalloy at elevated temperatures. Tensile test results showed that the addition of 3mass% Re significantly improved the ultimate tensile strength and yield strength from room temperature to 760 C. Creep test results showed that steady-state creep behavior dominated creep properties under the test condition of 760 C/724MPa. The steady-state creep rate and creep life of alloy with 3mass% Re was reduced by 31% and prolonged by 63%, respectively, compared to alloy without Re. The improvement in tensile and creep properties in 3mass% Re alloy was associated with a decrease in grain and 0 size and an increase in strength of = 0 matrix. However, adding 4.5mass% Re resulted in a decrease in the tensile and creep properties due to the formation of needle-like P phase in the grain interior. Fracture analysis demonstrated that during tensile and creep tests, cracks initiated and propagated along grain boundary in alloy without Re and containing 3mass% Re alloy; however, in the alloy containing 4.5mass% Re, cracks initiated and propagated along grain boundary and the P phase/matrix interface. Under the current tensile and creep conditions, 3mass% Re was an optimal addition for casting a fine-grain Mar-M247 superalloy. [doi:10.2320/matertrans.M2010299]

Influence of Rhenium on the Mechanical Behavior and Fracture Mechanism of a Fine-Grain Superalloy at Elevated Temperatures