English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

In order to develop a molybdenum alloy with high recrystallization temperature and excellent mechanical properties, multi-step internal nitriding of a commercial TZM alloy (Titanium–Zirconium–Molybdenum alloy) was studied through optical and transmission electron microscopy, fractographic analysis and three-point bending tests. Two types of nitriding processes, a two-step and another four-step process, were carried out at temperatures between 1423 and 1873 K. Recrystallization was completely suppressed, even at the center of a 1-mm-thick specimen through four-step nitriding, whereas recrystallization proceeded at the specimen center in the case of two-step nitriding. The recrystallization temperature of the TZM alloy in vacuum was raised above 1973 K by four-step nitriding. The ductile-to-brittle transition temperature (DBTT) of the nitrided TZM alloy depended strongly on the thickness of the deformed microstructure. DBTT of the four-step nitriding specimen was below 130 K, which is about 70 K lower than that of the two-step nitriding specimen. The yield stress of the four-step nitriding specimen at 1773 K was about 2.6 times as large as that of the recrystallized specimen.

materials transactions

Improvement in Recrystallization Temperature and Mechanical Properties of a Commercial TZM Alloy through Microstructure Control by Multi-Step Internal Nitriding