English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

The surface reforming of Ti wire by powder metallurgy was investigated in this study. Pure Ni powder, Ni/Ti powder and Ni/ Al powder were used as coating materials. A piece of Ti wire (φ=1.0 mm) was placed in an alumina crucible, and coating materials (Ni powder, Ni/Ti premixed powder, Ni/Al premixed powder) were filled around the Ti wire. The alumina crucible was vacuum sealed in a quartz tube with 2 ×10-3 Pa. The quartz tube was heated in an electric furnace for 60 min. For the test piece obtained, microstructure, phase and Vickers hardness were measured. A uniform compound layer was formed when the Ni / Al premixed powder was used as the coating material. The intermetallic compound layer was consisted of (Ti3Al+NiTi), (Ti3Al+Ti2Ni+τ4) phases. The surface reforming of Ti wire was able to be performed by dipping heat of Ti wire into Ni/Al premixed powder. [doi:10.2320/jinstmet.J2018005]

Surface Reforming of Ti Wire by Dipping Heating of Ti Wire into Pure Ni, Ni/Ti, Ni/Al Mixed Powders