English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

The objective of the present study was to find the orientation relationship between a recrystallized grain at its initial stage and a deformation microstructure in a nonuniformly deformed copper single crystal. A tensile strain of 25 was applied to a〈110〉copper single crystal sample in which shallow grooves were made at both side faces before the tensile test to promote nonuniform deformation. A thin disc specimen prepared from the deformed sample was annealed in a high vacuum. A scanning electron microscope (SEM)/electron backscatter diffraction (EBSD) method was used to analyze the orientations of deformed and annealed states. There are two primary slip planes of the largest Schmid factor in a facecenteredcubic metal single crystal deformed along a 〈110〉direction. In the present copper single crystal sample, both rightup and rightdown bandlike regions are formed in which either of the primary slips was activated. The arrangement of bandlike regions on the overall sample surface was almost symmetrical. Between bandlike regions, there were regions of patchy slip appearance, consisting of doubleslip and singleslip areas. The bandlike regions were rotated so that the slip directions moved towards the tensile axis. On the other hand, the rotation of patchy regions was relatively small. In the disc specimen annealed at 833 K, a recrystallized region was formed at the boundary between bandlike and patchy regions. The recrystallized region consisted of two types of recrystallized grains having a twin relationship each other. Both types of recrystallized grains had an〈111〉rotated orientation relationship with the bandlike region.

Orientation of Initial-Stage Recrystallized Grain in Non-Uniformly Deformed Copper Single Crystal