English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

The enhancement of strength of a Cu-1.4 mass%Ni-0.25 mass%P-0.1 mass%Zr alloy, in which the Ni and P contents are about twice larger than those in commercial Cu-Ni-P alloys, has been tried by means of combining accumulative roll-bonding (ARB) process by 7 cycles and aging treatment at 350 to 450℃. For the sake of comparison, the mechanical properties of the alloy conventionally cold-rolled to a reduction of 50% and 90% and aged at 350 to 450℃ have also been examined. The grain sizes of the Cu-Ni-P-Zr specimens deformed by 7-cycle ARB process and 90% cold-rolling were refined down to about 0.4 μm and 4 μm, respectively, and the fractions of high angle grain-boundaries in the specimens were nearly the same, about 45%. Initial aging, subsequent ARB process or 90% cold-rolling and re-aging at 400℃ produced the Cu-Ni-P-Zr alloy highly strengthened. The alloy, initially aged, then ARB-processed and re-aged, had a tensile strength of 780 MPa, an elongation of 6% up to failure and an electrical conductivity of 56% IACS. The differences in yield strength among the re-aged specimens after 50% and 90% cold-rolling and ARB process are explained by the differences among the dislocation density, grain size and inter-precipitate spacing

Influence of Accumulative Roll Bonding and Cold Rolling Processes on the Precipitation Strengthening Properties for Cu-Ni-P Alloy