English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

Integrated Ocean Drilling Program (IODP) Site U1418 was drilled during Expedition 341 in 2013. The site is situated on the Surveyor Fan, one of the largest deep-sea fans in the world. The site was drilled to 972 m below seafloor, and a sediment record spanning ~1.2 My was attained. For this study, 285 sediment samples were analyzed for bulk geochemical composition using wavelengthdispersive X-ray fluorescence (XRF). Records for the major elements Al, Ca, Fe, K, Mg, Mn, Na, P, Si, and Ti and minor elements As, Ba, Co, Cr, Cu, Mo, Ni, Nb, Pb, Rb, Sr, Y, V, U, Zn, and Zr are presented, as well as data for total carbon and total organic carbon analyzed by elemental analyzer. Introduction Integrated Ocean Drilling Program (IODP) Site U1418 is one of five sites drilled during Expedition 341 in the Gulf of Alaska and is situated on the proximal Surveyor Fan at a water depth of 3703 m (Figure F1). The 972 m cored interval analyzed here (based on a splice of samples from Holes U1418A, U1418B, U1418D, and U1418F) represents a depositional history of ~1.2 My according to the shipboard age model (Jaeger et al., 2014a). Site U1418 was primarily drilled to obtain a paleoclimate record in the Gulf of Alaska. The chemical composition of sediment core samples can be used to investigate a broad variety of environmental or chemical processes: changes in bulk sediment composition over depth/time can reflect a change in the source area of the detrital material. Enrichment of specific elements such as Si or Ba can be associated with organic material and caused by higher bioproductivity (Goldberg and Arrhenius, 1958; DeMaster, 1981; Von Breymann et al., 1992). Elements such as Si, Ti, and Zr can be associated with larger grain sizes (quartz) or heavy minerals (Wedepohl, 1971). Enrichments of specific diagenetically active elements (Ca, Ba, and Fe) and trace metals (Co, Cr, Cu, Mo, Ni, V, and U) in specific horizons can indicate authigenic mineral formation and thus suggest past or present diagenetic reactions (e.g., Riedinger et al., 2006; Torres et al., 1996; Wehrmann et al., 2016). For provenance studies, general composition of multiple elements can be compared to the composition of specific lithologies on land (Haughton et al., 1991). In the Gulf of Alaska, the main lithologies delivering detrital material to the ocean are situated in the Chugach-St. Elias Coastal range, as determined for the more coastproximal Site U1419 in geologically recent times (Barker et al., 1992; Penkrot et al., 2018). To reveal if an unusual enrichment or depletion of a specific element exists, comparison to Average Shale (Wedepohl, 1991, 1971) as a first assessment is useful. Sedimentary carbon content can provide information on changes in carbon deposition and preservation. Changes in total organic carbon can be an indicator of variations in past bioproductivity or preservation/degradation of deposited organic material (Hedges and Keil, 1995). Inorganic carbon can indicate changes in carbonate shell deposition (e.g., from foraminifers) or formation of authigenic carbonates in diagenetically active zones (Hathaway and Degens, 1969). Here, we present bulk inorganic geochemical data alongside total and organic carbon from Site U1418 in the Gulf of Alaska. M. Zindorf et al. Data report: wavelength-dispersive X-ray fluorescence–based geochemical data Methods and materials A total of 285 sediment samples from Holes U1418A, U1418B, U1418D, and U1418F were taken on board the R/V JOIDES Resolution to provide a continuous sediment record over the entire cored interval. Samples are either cubes previously used for paleomagnetic analyses (179 samples) or squeeze cakes used for pore water extraction (105 samples). Thus, the individual samples integrate over different sediment intervals: a paleomagnetic cube has an edge length of 2 cm, whereas a squeeze cake covers 5–30 cm of a wholeround core. Sample type for each individual sample as well as sample length is indicated in the data set (see XRF in Supplementary material). Samples were freeze-dried and homogenized with an agate mortar and pestle. From each sample, 700 mg was mixed with 4200 mg dilithiumtetraborate, preoxidized with 1 g ammonium nitrate at 500°C and then fused to homogeneous glass beads. The glass beads were analyzed by wavelength-dispersive X-ray fluorescence (XRF) (Panalytical Axios Max, 3 kW) for major and minor elements (Si, Ti, Al, Fe, Mn, Mg, Ca, Na, K, P, As, Ba, Co, Cr, Cu, Mo, Ni, Nb, Pb, Rb, Sr, Y, V, U, Zn, and Zr). The XRF was calibrated with 52 standard reference materials (SRMs) and in-house standards. Average absolute errors are listed in Table T1 along with average concentrations of each element. Major elements are reported as oxides and converted to elemental values using a conversion factor reported in Table T1 (e.g., [Si] = [SiO2] × 0.4674). Total carbon (TC) and total organic carbon (TOC) were analyzed using a Leco combustion analyzer. Total inorganic carbon (TIC) was calculated as the difference between TC and TOC. Reproducibility was better than 5% for TC and 10% for TOC, as determined by analyzing duplicates of every tenth sample. Average results can be found in Table T2. All results are presented in weight percent or parts per million of dry sediment weight. Sample depth indications are given in meters below seafloor (mbsf) on the CCSF-A (core composite depth below seafloor, as described in the Methods chapter [Jaeger et al., 2014b]) depth scale. This represents a continuous composite depth scale combining all drilled holes into a splice. Results Inorganic elemental geochemistry Consistent across all geochemical data is that there are no abrupt changes or breaks observed that could be linked to distinct paleoclimatic or diagenetic events. All elements show consistently small variations throughout the core except P and Ni. In the P record, major narrow peaks exist that exceed the background signal 2to 5-fold. These peaks could represent past diagenetically active Figure F1. Position of Site U1418 in the Gulf of Alaska. (Map created with Ocean Data View [Schlitzer, 2015]). 56° 58° 60° 62° N Alaska

Data report: wavelength-dispersive X-ray fluorescence–based geochemical data, Site U1418, IODP Expedition 341, Gulf of Alaska