English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

The hot pressing operation is one of the most important operations in medium density fibreboard (MDF) manufacture. Complicated dynamic interactions occur during pressing, including heat transfer, moisture movement, development of gas pressure, internal stress development and relaxation, wood consolidation, resin curing, bonding between particles and eventual development of a non-uniform density distribution through the panel thickness. Consequently the mat experiences continuously changing internal conditions (temperature and moisture content) as the pressing operation proceeds. The vertical density profile (VDP) has a major influence on the MDF strength and physical properties. This influence of the VDP on the board properties is generally recognised, but the formation of the density profile and their specific effects on the board performance have proved difficult to quantify.  A mathematical model based on theoretical analysis and experimental information is being developed. In the model, the mat is divided into a number of thin parallel layers. The deformation of each layer is a function of stress, temperature and moisture content of the layer. The model incorporates the variation of the mat mechanical and rheological properties with moisture content and temperature. The changes in temperature and moisture content are provided by a separate heat and mass transfer model. The present model can predict stress, strain, layer deformation and density across the thickness during pressing.  The performance of the model was validated by experiments conducted in a pilot-scale press. Twelve MDF boards were made with different pressing parameters, and the VDP were measured and compared with the simulation results from the model. The model could predict the density profile with an acceptable accuracy for the main variables that control the manufacturing of MDF boards.

Modelling of the Development of the Vertical Density Profile of MDF during Hot Pressing