English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

Two TaC-strengthened cobalt-based alloys, with compositions Co-10Cr-0.25C-4.4Ta and Co-10Cr-0.5C-8.7Ta (wt.%) underwent Cr-deposition by pack-cementation, followed by heat-treatment to allow Cr diffusing deeper in their sub-surface. Thereafter they were tested for 50 hours at 1200°C in a thermobalance. These alloys were successfully enriched in chromium, with a maximal content on surface of about 30wt.% and a depth of enrichment of several hundreds of micrometers. This allowed a chromia-forming behavior of the cemented alloys despite the 10wt.%Cr of the bulk. This was especially true for the {C,Ta}-richest alloy the oxidation kinetic of which was wholly parabolic and analogous to a Ni-30Cr alloy known for its good behavior in oxidation at 1200°C. The parabolic constants and chromia-volatilization constants were at the same levels of the Ni-30Cr ones. However, the chromium enrichment step, especially the diffusion heat-treatment following the cementation, causes fragmentation and surface fraction reduction of the tantalum carbides which strengthen the alloy.

Chromium Deposition on Cobalt-Based Alloys by Pack-Cementation and Behaviour of the Coated Alloys in High Temperature Oxidation