English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Zendy Plus

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Zendy Tools

Zendy Open

All of the high-heat-load critical components in the new canted-undulator front-end (CU FE) design use wire-coil inserts inside of the cooling channels to significantly enhance heat transfer. Wire-coil inserts have replaced the copper-mesh inserts used in previous front-end high-heat-load critical-component designs. The exit mask, the most downstream component in the CU FE line relative to the x-ray beam path, has an exit aperture of 2 mm vertical x 3 mm horizontal and is the most sensitive component, in terms of final beam stability, of all of the CU FE components. In general, final beam stability is determined by the storage-ring output-beam stability and not by the CU FE components. Although front-end components are not very sensitive to vibration, several measurements have been performed to assess the flow-induced vibration associated with the CU FE exit mask. Results yield only 0.16 {micro}mrms vertical displacement and 1.0 {micro}mrms horizontal displacement under worst-case conditions. The maximum displacement values are very small compared to the aperture size, and therefore flow-induced vibration has a negligible effect on the CU FE output beam stability. More general measurements have also been performed to directly compare flow-induced vibration in an open, unrestricted tube relative to the same tube containing either a wire-coil insert or a copper-mesh insert. Operational performance data are presented for these heat-transfer-enhancing inserts, and the advantages and disadvantages, in terms of selection criteria, are discussed

Canted undulator front-end exit-mask flow-induced vibration measurements.