English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Zendy Plus

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Zendy Tools

Zendy Open

During the six months of this reporting period, we accomplished the following: Preparatory work was done on the development of the feed supply system (for mixtures of AlCl{sub 3}, SiCl{sub 4}, H{sub 2} and CO{sub 2}) and effluent treatment section for the CVD system we plan to employ for coating preparation. A comprehensive literature survey of past work done on the chemical vapor deposition of silica, alumina and aluminosilicates (mullite) was carried out, and work was initiated on the study of thermochemical equilibrium in the Al/Si/Cl/C/O/H system so as to identify the boundaries of the region of the space of operating parameters and conditions where preparation of functionally graded mullite/ alumina coatings through CVD from metal chloride, CO{sub 2}, and H{sub 2} is feasible. Since the alumina/mullite films that are proposed to be developed can also be applied to carbon matrix composites provided that a layer that bridges the gap that exists between the thermal expansion coefficient of carbon and that of mullite is employed, experiments were conducted on the preparation of compositionally graded carbon/silicon carbide coatings. Deposition from mixtures of ethylene and methyltrichlorosilane or tetrachlorosilane (silicon tetrachloride) in hydrogen was used for the preparation of SiC/C coatings, and our experiments focused on the study of the occurrence of multiple steady states in the deposition process and the effects of the type of chlorosilane on the deposition rate and the deposit composition and their variation along the length of the reactor. The results showed that when operation is carried out outside the multiplicity region, codeposition of SiC and C from ethylene and chlorosilanes is a feasible route for preparation of SiC/C graded coatings

Functionally Graded Alumina/Mullite Coatings for Protection of Silicon Carbide Ceramic Components from Corrosion