English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

Objective: The aim of this study was to evaluate the micro-shear bond strength between a dual cured resin cement and five different types of ceramics in composition and techniques of construction, using two different surface treatments.Materials & methods: A total of 50 ceramic disks were made and divided into 5 equal groups according to material type IPS Empress CAD, IPS e.max Press, IPS e.max CAD, Vita Suprinity and PM9 (n = 10). Each group was subdivided into 2 subgroups according to surface treatment they will be subjected to (n=5). Subgroup I: Bonding surfaces were etched with 5% HF acid, then coated with Monobond S. Subgroup II: Monobond Etch & Prime was applied on the bonding surfaces. For standardization of bonding surface area, 5 plastic tubings distributed on the bonding surface of each disk were used to place the dual resin cement. The samples were then subjected to micro-shear bond strength.Results: Results showed insignificant difference in micro-shear mean values between the IPS Empress CAD subgroups while significant differences were found between the other subgroups within the same group. Monobond Etch & Prime surface treatment resulted in higher micro-shear bond strength compared with HF surface treated subgroups for all the tested materials except for the PM9 and IPS e.max CAD. Conclusions: It was found that ceramic microstructure as well as the fabrication technique affects the selection surface treatment type. Also, Monobod Etch and Prime as a single step surface treatment produced clinically accepted and comparable results to that of HF treatment.

EFFECT OF TWO DIFFERENT SURFACE TREATMENTS ON MICRO-SHEAR BOND STRENGTH OF CAD/CAM AND HEAT PRESSED GLASS CERAMICS