English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

In order to further analyze the stability and control mechanism of surrounding rock in the gob-side entry retaining, the slip instability coefficient k1 and compression failure coefficient k2 are proposed by the mechanical analysis of the established filling body mechanics model, and when both k1 and k2 are less than 1, the roadside filling body can keep stable. The mechanical model of main roof is analyzed by the static equilibrium method, and the formula for calculating the maximum roof subsidence is deduced. Based on the data of haulage gateway of No. 21201 coal face of Juncheng Coal Mine, using the formula to calculate the amount of roof subsidence at the junction point of filling body and the roof, and proposes two methods to reduce roadway floor heave by increasing the roadside filling width and transferring the surrounding rock stress to the gob. Finally, the corresponding surrounding rock control technology is proposed according to the surrounding rock deformation characteristics during roadway excavation, roadway retention and roadway reuse, and then carries out field monitoring and evaluation. The results show that after adopting the corresponding supporting technology, the surrounding rock of the gob-side entry retaining has been effectively controlled from the excavation to the reuse period with the coal face advancing, the roof-to-floor convergence of roadway solid coal side is less than 220 mm, the roof-to-floor convergence of filling body side is less than 280 mm, and the convergence on the both sides of the roadway is about 190 mm. At the same time, the calculated roof subsidence with the junction point of filling body and the roof is similar to the field monitoring results, which achieves the expected control effect, and the research contents provides a certain reference for the support technology of the gob-side entry retaining.

Discussion on stability analysis and support technology of surrounding rock of gob-side entry retaining