English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Zendy Open

Presents the pdf analysis as premium feature

PDF Analysis

Insights

Presents the summarisation as premium feature

Summarisation

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the zaia usage as premium feature

ZAIA

Zendy Tools

Zendy Plus

Presents the access of premium content as premium feature

Premium Content

Biotite dissolution in the laboratory and in nature was examined and compared to elucidate certain aspects of the weathering processes. Batch dissolution experiments of fresh biotite [(K 0.91 Na 0.01 )(Mg 0.40 Fe 2.07 Mn 0.05 Al 0.14 Ti 0.19 )(Si 2.82 Al 1.18 )O 10 (OH) 2 ] in granite were carried out at 150 ℃ for 1 to 56 days. Examination by scanning electron microscope (SEM) equipped with an energy dispersive X-ray spectrometer (EDS) revealed that, in the early stage, dissolution proceeds from the edges of crystals inward and secondary minerals such as Fe oxide are precipitated mostly at the edges, with only a few secondary minerals found on the basal surfaces. A dissolution experiment using a mixture of biotite and muscovite, done at 150 ℃ for 7 days, indicated that hematite crystals formed mostly at the edges of biotite but not on muscovite. This observation suggests that released Fe is precipitated before it diffuses into the bulk solution. Because a dissolution rate at the edge is larger by two orders of magnitude than at the basal surface (Turpault and Trotignon 1994), precipitation before diffusion of dissolved elements to bulk solution well explains the preferential secondary mineralization at the edges in the laboratory experiments. SEM-EDS of fresh to slightly weathered biotites revealed that early stage weathering proceeds in the same way as in the laboratory with the edges being preferentially weathered and secondary minerals being precipitated mostly at the edges. Because of the similarity between the occurrence of secondary minerals in the laboratory experiments and in nature, the laboratory results elucidate the early stage weathering conditions, namely that (1) supersaturation with respect to secondary minerals in a solution occurs around biotite, i.e., the solution is poorly connected to a main flow pathway of water, and (2) once supersaturation is achieved, secondary minerals are precipitated mainly at the edge before some released elements diffuse into the solution. The immobility of water immediately adjacent to primary minerals partly explains the large difference in dissolution rate between the laboratory and natural samples.

Biotite dissolution processes and mechanisms in the laboratory and in nature: Early stage weathering environment and vermiculitization