English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Zendy Plus

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Zendy Tools

Zendy Open

Loftis, J.D.; Wang, H.V.; DeYoung, R.J., and Ball, W.B., 2016. Using lidar elevation data to develop a topobathymetric digital elevation model for sub-grid inundation modeling at Langley Research Center. In: Brock, J.C.; Gesch, D.B.; Parrish, C.E.; Rogers, J.N., and Wright, C.W. (eds.), Advances in Topobathymetric Mapping, Models, and Applications. Journal of Coastal Research, Special Issue, No. 76, pp. 134–148. Coconut Creek (Florida), ISSN 0749-0208. Technological progression in light detection and ranging permits the production of highly detailed digital elevation models, which are useful in sub-grid hydrodynamic modeling applications. Sub-grid modeling technology is capable of incorporating these high-resolution lidar-derived elevation measurements into the conventional hydrodynamic modeling framework to resolve detailed topographic features for inclusion in a hydrological transport model for runoff simulations. The horizontal resolution and vertical accuracy of the digital elevation model is augmented via inclusion of these lidar elevation values on a nested 5-m sub-grid within each coarse computational grid cell. This aids in resolving ditches and overland drainage infrastructure at Langley Research Center to calculate runoff induced by the heavy precipitation often accompanied with tropical storm systems, such as Hurricane Irene (2011) and Hurricane Isabel (2003). Temporal comparisons of model results with a NASA tide gauge during Hurricane Irene yielded a good R2 correlation of 0.97, and root mean squared error statistic of 0.079 m. A rigorous point-to-point comparison between model results and wrack line observations collected at several sites after Hurricane Irene revealed that when soil infiltration was not accounted for in the model, the mean difference between modeled and observed maximum water levels was approximately 10%. This difference was reduced to 2–5% when infiltration was considered in the model formulation, ultimately resulting in the sub-grid model more accurately predicting the horizontal maximum inundation extents within 1.0–8.5 m of flood sites surveyed. Finally, sea-level rise scenarios using Hurricane Isabel as a base case revealed future storm-induced inundation could extend 0.5–2.5 km inland corresponding to increases in mean sea level of 37.5–150 cm.

Using Lidar Elevation Data to Develop a Topobathymetric Digital Elevation Model for Sub-Grid Inundation Modeling at Langley Research Center