English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

NiCuZn ferrite(Ba0.7Sr0.3)TiO3 (BST) composite ceramics with the BST content of up to 50 vol% were fabricated by sinteringcompacted powder mixtures at 900°C. The granulation of the BST powder and addition of a Bi2O3-based oxide additive effectivelyassisted the densification of the composite samples. The samples thus fabricated showed required ¾r values whereas their ®r valueswere considerably reduced, especially for those with lower BSTcontents. From the detailed examinations on the effect of the Bi2O3-based oxide additives and on the process modification to improve the reduced ®r values, the addition of a Bi2O3ZnOadditivewith the eutectic composition of as low as 1wt%was enough to produce a densified 10 vol%BSTcomposite sample with a highest®r value. It was also found that the incorporation of ferrite granules calcined at 600°C caused further improvement of ®r. Thus,a densified 10BST composite sample with ®r = 125 was fabricated by low-temperature sintering at 900°C

journal of the ceramic society of japan

Low-temperature fabrication of NiCuZn Ferrite–(Ba&lt;sub&gt;0.7&lt;/sub&gt;Sr&lt;sub&gt;0.3&lt;/sub&gt;)TiO&lt;sub&gt;3&lt;/sub&gt; composites using granulated powders