English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Zendy Plus

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Zendy Tools

Zendy Open

The microstructure of rolled annealed Mg-6%Al-1%Zn (AZ61) and Mg-6%Al-1%Zn-0.5%Ce (AZ61Ce) alloys (wt.%) was investigated by optical microscope (OM), scanning electron microscopy (SEM) and X-ray diffraction (XRD). The electrochemical and corrosion behaviors were studied by potentiodynamic polarization curve, electrochemical impedance spectroscopy (EIS) and hydrogen evolution test. The results show that the addition of Ce refines the grains of AZ61 alloy and promotes formation of Al11Ce3 phase. In addition, the AZ61Ce alloy exhibits better corrosion resistance than the AZ61 alloy, probably because the Ce can reduce the content of impurities (such as iron and nickel) and refine the grain of AZ61 alloy. When the two alloys were assembled into Mg-air battery, the AZ61Ce alloy exhibits significantly improved performance than the AZ61 alloy. This improvement in performance may due to the changes in alloy structure and composition. The refined grain and reduced impurities lower its self-corrosion and enhance its anode efficiency during discharge, the refined grains also lead to more grain boundaries, which provide more channels for the anode reaction, the refined grains and the existence of Al11Ce3 phase may together make the products film thinner and more porous during discharge, which result in easier contact of the electrolyte with the metal and a larger area of the anode reaction. This study shows that AZ61Ce alloy is an ideal anode material for Mg-air battery.

Electrochemical performance of Mg-Al-Zn and Mg-Al-Zn-Ce alloys as anodes for Mg-air battery