English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

During the jewelry stone-in-place micro-casting process, the ceramic mold, which is composed of silica and plaster is stabilized at temperatures close to 650 °C, whereas the casting temperature of the precious metal alloy hovers around 1000 °C. Therefore, this type of micro-casting technique is not suitable for gems such as emeralds, since they are highly susceptible to damage at temperatures over 350 °C. In the face of this fact, the main purpose of the present work is to develop a refractory mold based on chamotte and plaster, which can be stabilized at low temperatures, in order to use it for the micro-casting of pre-set emeralds. To achieve this, the experimental methodology was divided into three phases: i) raw chemical materials, mineralogical, granulometric and thermal characterization; ii) preparation and characterization of chamotte-plaster-water mixtures, including the measurement of casting times, mechanical and microstructural properties, permeability, and resistance to thermal shock; and iii) evaluation of the resulting refractory mold in the micro-casting of pre-set emeralds. The results showed that the refractory mold with composition chamotte/plaster 75/25, an addition of 50 % of water to the dried mixture, and fine granulometry (-200 mesh) had a stabilization temperature of 350 °C. Furthermore, it is possible to subject the emeralds to the stone-in-place micro-casting process that employs the refractory mold developed here, with a thermal treatment that does not surpass the 350 °C, along with a low melting point (398 °C) for the precious metal alloy.

Desarrollo de un revestimiento de chamota/yeso para microfundición de joyería con esmeraldas preengastadas